Canvas 85-litre pack for multiday bushwalking in wet, remote country.
The Wilderness Equipment Prion 85 has a canvas, roll-closure storm-throat. The lid is removable, which means you could use this pack lidless.
At 85-litres, this pack has room for everything you might need on an extended hike in the bush.
The harness is built for carrying heavy loads.
- Extended, wide-opening, all-canvas throat for durability and ¾ length bivvy protection
- Alpine rack with gusseted back pocket for ice tools, skins, cutting board, map… whatever!
- Big, effective top cover converts to bum bag
- Hi-Load Synchro-FORM harness suited to extreme loads
- Much like its bigger cousin, the Lost World, this pack combines essential break-down modularity, compression ability and fit-out for alpine use with the strength, heavy-load comfort and weather-resistance demanded on extended, off-track journeys through rough, wet country. At 85+ litres the Prion 85 still has the capacity for long trips, where gear choices have been carefully made with a ‘leave anything luxuries at home’ mentality.
THE WE AX FRAME
The WE AX (assymetric-cross) internal frame is the structural platform used in all WE big-capacity backpacks for over 30 years. Both our sophisticated Synchro-FORM harness system and the Perfect-FIT hip harness integrate directly with it. We are convinced this frame configuration, coupled directly to our hip harnesses, can not be improved on where heavy loads are involved. The fact that the cross-frame configuration has been adopted by some well-known, international brands for their high volume, expedition pack models says something. The only reason we can see why it is not more commonly used is the extra construction work involved in the pack’s harness panel compared to say a parallel frame bar arrangement. Here is the explanation of it’s simple brilliance…
WHAT DOES A BACKPACK FRAME NEED TO DO?
The most important function is to provide “prop-up” stiffness to the pack bag so that load carried in the pack can be effectively loaded through the pack hip harness onto the wearer’s hips. Without adequate stiffness the pack bag will simply sag and re-load the shoulders.
The next function of the frame is to form an (adjustable) surface in the harness panel of the pack bag that follows the shape of the wearer’s back. In this way the pack load can be carried as close to the back as possible. This was not possible with the original, external backpack fixed shape frame designs.
If the frame is stiff enough to maintain its given shape once formed to the wearer’s back profile then it can maintain a small but highly effective contact-free, ventilation clearance, an function where original, pre-seventies, external backpack frames over-achieved.
Another function of the frame is to help define and control the shape of the pack bag, particularly at the top where it usually opens. At the base of the bag the cut of the fabric panels do this job well enough. At the top, if the frame structure extends out to the edges of the pack harness panel then this rigidity will reduce the tendency for the top of the pack bag to round-out away from the wearer.
Finally, here is a nice, second-order possibility linked to the cycle of body dynamics that define walking. To maintain dynamic balance when walking, our hips and shoulders rotate slightly in opposite senses, following the swing of opposing arms and legs. If the pack frame system has built-in torsional springiness it can constantly recycle some of the energy associated with deforming it one way then the other. Frame systems that are “dead” transmit this energy to the pack bag where it is absorbed and lost.
HOW THE AX-FRAME WORKS IN A WE BACKPACK
This simple frame consists of two light-weight, tempered, high-tensile aluminium bars. The cross-section of the bar material has a slight curvature. This increases the bar stiffness without adding weight. The frame bars are pre-curved in production, according to their pack size length, so they approximate the curvature of a typical human back profile. Even under rough handling these bars retain the essential curves built into them. Despite this, it is still possible to adjust their shape to individual profiles by applying firm hand pressure.
The bars form a cross in the pack harness panel, located in separate fabric channels. At their top ends they reach almost to the outer corners of the harness panel. Their bottom ends are located closer together and stop well above the base of the pack bag. (This makes the assymetric-cross). The exact geometry at the bottom is part of the Synchro-FORM hip harness system design. Hip harness components fasten through the pack bag directly into threaded fittings built into the bottom ends of the frame bars. This arrangement also eliminates the possibility of the frame wearing a hole in the base of the pack bag, something you see on some well used packs where the frame extends to the base panel seam.
This simple frame system achieves every function identified in the previous section. It is the cross arrangement of the separate bars that is responsible also for excellent torsional springiness. The profile arc shapes of the frame bars also add resiliency and cushioning to the system in just the same way as the curvature of the human spine protects against shock when jumping down a step.
NOW INCLUDEDS RIFLE/BOW SCABBORD